There are many types of hair removal instruments. On the market, 808 semiconductor laser hair removal instruments are the best choice, but the types of 808 are also very different, so how should we choose a good 808 hair removal instrument? What is important for an 808 freezing point hair removal instrument? For many people, hair removal is just a project to recruit customers, and the fee is not high; but although hair removal is only a project to recruit customers, it is not possible to use poor equipment to cause injury! Naturally, what we need to consider is not only the single cost of the instrument as a customer, but also the effect that the instrument can achieve for hair removal! The 808 semiconductor hair removal instruments on the market can be divided into three categories according to their heat dissipation and cooling methods: no channel, macro channel, and micro channel. So what is the point of difference and how is the difference between each channel?
The effective number of light output of the instrument without channel is 2 million, and the number of hair removal needs about 6 times. Although the heat dissipation of the instrument with this configuration is water-cooled, it mainly relies on the fan, and the heat dissipation is poor. Therefore, when operating it for customers, the customer will have obvious tingling sensation. Because it is a chip laser, there may be places where the hair removal treatment is not in place, which will affect the effect. Later, the absorption of pigments in the hair follicles for the hair requires higher energy, but if the energy adjustment is too high, the client will experience significant pain, and it can only be operated with low energy. The poor heat dissipation of the instrument will also cause the problem that the laser in the handle of the instrument is easy to burn out in the long-term overheating environment; at the same time, due to insufficient heat dissipation, the instrument cannot work for a long time, and the instrument needs to stop working after a period of operation. Cool the instrument.
The effective light output times of the macro-channel instrument handle is about 5 million rounds, and the hair removal times are about 5 times. The heat dissipation method of the instrument is fan plus water circulation to dissipate heat. The contact area between the heat dissipation channel and the laser is limited, and the heat dissipation is better than that of the instrument without channels. There will still be a tingling feeling when operating on the client, and the energy cannot be adjusted too high for the client, and there will still be some cases where the hair of some clients cannot be completely removed in the later stage. At the same time, due to the insufficient heat dissipation ability of the instrument for the laser, the instrument cannot work for a long time, and the handle weighs 2 kg, so the beautician cannot hold it for a long time at all. The biggest disadvantage is that it is easy to burn the palladium bar. At the same time, there will also be failures in the handle after working for about 4 months, and the failure repair rate of the instrument is high.
The effective number of light emitting times of the micro-channel instrument can reach more than 10 million times, and the number of hair removal times that the instrument can achieve is about 3 times. The specific number of times required by different customers, different parts, and different hair colors is also different. The final effect that the instrument can achieve is that a small amount of fine non-pigmented fluff will grow on the hair removal site in about a year, which will not affect the visual sense. The 808 semiconductor laser hair removal instrument with micro-channel configuration adopts air-cooled + water-cooled + semiconductor triple cooling method. The micro-channel technology makes the contact area between the water circulation channel and the laser larger, and the heat dissipation effect is better. At the same time, the temperature of the instrument handle is controlled at 4- About 5 degrees, it can ensure that the operation of the instrument can ensure that the freezing point is painless and will not freeze, and will not produce water drops inside the laser, ensuring the service life of the laser, and at the same time avoiding skin damage caused by the handle being too cold.
Post time: Dec-26-2023