1.Working Principle of Diode Laser System
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat
damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.Slight pain, easy operation, the safest technology for permanent hair removal.
808nm diode laser has been proved to be the most speed choice for most types of skin and hair removal.
2Mixed wavelengths of 755nm 808nm 1064nm is suitable and effective for all skin tones and hair colors.
The light wavelength have the property that:
The longer the wavelength, the deeper the penetration, and the lower energy absorption;
The shorter the wavelength, the higher the energy absorption, and the higher energy absorption.
Each wavelength light has its main treatment range:
808nm is the fastest wavelength in hair removal;
755nm has great result in thin hair removal;
1064nm is mainly for hair removal in dark or tanned skin customers.
For mixed triple wavelengths diode laser, these 3 wavelengths will work together at same time. 755nm, 808nm and 1064nm wavelength lights have different penetration depth and melanin absorption ability,
suitable for different skin types and hair types.
Diode laser (both diode laser 808nm and diode laser mixed triple wavelengths) has a wide range application including hair removal of cheek, lip, beard, neck, back, chest, armpit, arm, bikini, leg, etc.
2.Introduction of handle
The diode laser handle is unique designed with CIA™ Technology and ICE™ Technology.
CIA™ Technology- Cooling In Advance
It uses 25mm * 25mm TEC cooling tips to cool the skin before, during and after treatments. It can protect the epidemis from hurt, reduce the pain during hair removal, and increase the comfort for patients.
ICE™ Technology – Simultaneous Contact Cooling
It is an advanced technology that cools the skin continuously during treatments. It minimizes the risk of burns on the epidermis while maintaining heat to penetrate dermis where hair follicles are.
Treatment Principle
The goal of laser hair removal is to achieve follicular destruction rather than temporary epilation resulting from heating of the hair shaft alone.Destruction of the hair shaft without transfer of sufficient energy to
the follicular and perifollicular tissue will most likely provide only
temporary epilation.
This is most often noted with low-power scanned lasers; and may explain the rapid regrowth seen with low energy hair removal systems. Choosing the correct treatment parameters is essential for successful treatment.
Post-Treatment
1. After treatment, skin will have some burning sensation ,cooling the treatment area with cooling head for 10 -15minutes;
2.The treated area may experience some red rashes, it will vanish after a day or two.
3.Do not apply heavy creams or lotions as these may block the pores and cause complications.
4.Avoid intense sunlight, sunbed or other artificial tanning for one month after treatment. Tanning after treatment sessions may enhance melanin regeneration, which may result in hyper-pigmentation
5.Do not scrub or exfoliate the treatment area within7 days. Do not use chemicals or medications (other than those referred to in these instructions) on the treated area for one week.
Post time: Dec-29-2021